Give Full Control to Your Offline Chart
The Omnia Remote indicator supports all Omnia series generators. It is able to change most of the input parameters on-the-fly directly from the offline chart.
Current version is
The indicator displays tooltips to make its use intuitive.
The on-the-fly chart selector.
Note: The terminal sometimes spoils its sub-windows layout. Use ctrl+A to reset the layout.
In addition to parameters fields, the Omnia Remote indicator adds additional display, some depending on the current chart type.
- chart type switch
- quick navigation to the feed chart
- marks on levels for new candle to open
- information about remaining candle volume (tick chart)
- continuous remaining candle time (flexi chart)
- graphics switch (Point & Figure)
- continuous server time
It occupies a fixed room 20 px on the indicator bottom.
Hello
The range bar work well now, thank you !
By the way, do you have any specific range bar calculator who go with it ?
Michael
Hello Michael, try the OmniaAutoRange, if it suits your need.
Do you have an manual? When I click on the unknown I the list but when I select for example Flex Renko the text stays on unknown.
Helo Sharam,
unknown chart type means either there is no counterpart OmniaBar or the OmniaRemote is obsolete (lower version than OmniaBar).
beetwen the fact that you can change easily the range of your range bar on the offline chart and that we can see the high and low of the next range bar, the omnia remote is just magical ! thank you Milan !
Comment…hi.how can i get the mean renko …
You may download either MeanrenkoBar or OmniaBar. Watch the video tutorial in their product pages for detailed instructions.
How do I check the version that I’m running right now?
Either open the indicator dialog, or hover the mouse above the indicator name in the navigator window.
Good night, paera do the 15 days test need a release? Because the graph gets offiline, could you help me I have interresse if the indicator function ok.
Thank you see you ….
Hi Milan,
thx for this great indicator. It makes my trading decision much more precise.
But I had a Problem which I hope you will be able to solve.
After I have to shut down the MT4, in all my generated Renko-Charts there will bei in OmniaRemote the sign ‘unknown’.
I’ve tried to delete the indicator from the chart and put it on again… but no result.
Thx
Oliver
It probably means the chart is no more in connection with the builder. It may occasionally happen if you leave the chart ID field empty in the inputs of the builder. Enter some custom ID in the input and the chart reconnects after the MT4 relaunch.
hi
So if I put 1 in the omnia remote for mean renko bars, what does it do?
Also how do I know when a candle has closed when 1 is inputted?
sorry for the nooby qs
thanks
Sam
Hello Samuel, the remote is used to control the generator parameters on-the-fly. If it looks dead, it is not on the proper chart.
The question of how you know closing candle event is not related, but the candle is considered closed whenever a new candle appears.
Hi Milan,
you mention above that the Current version is 210.012, but when I download and install it, it shown still Version 210.009 from last year in the About tab. Am I doing something wrong?
Indeed, thank you, uploaded the 210.012
I used the trial version of the OmniaBar and the OmniaRemote. I really think you should remove the OminaRemote from “Free” as the only way to get it is to purchase the OmniaBar once the trial is up. That is very misleading in advertising quite honestly. To pay $120 for the Bar indicator is not a problem but to say the OmniaRemote is free is not correct. Overall though, great products.
Hello Renee, I do not think I advertise the Remote anywhere. However I can imagine that such optional additions could have their price. This one is for free.
Milan
Thanks for responding. What I mean is that the OmniaRemote is listed under the “Free MT4 Utilities”. In the case of having to use it with OmniaBar, it seems a little confusing. One would think that if the Remote has to be used with the Bar then it is in fact not actually “free”. No worries though.
I will be looking to purchase the OmniaBars since it is all inclusive of what I want and works with the OmniaRemote. I am assuming the RenkoBars does not work with the Remote as a stand-alone?
Either way, these are very useful and work really well!
Hey Milan,
I have sofar purchased the Renko and the OmniaBar.
I recommended to my friend..and in total we have about 5 copies running.
However, we are facing a ‘freezing’ problem. Quite a big problem here.
All of a sudden, I open the M4 chart and the candles are frozen. I have to first go to the inputs of the indicator on the feeder chart (M1) and click ok. Only then, the M4 starts moving.
___
We use EAs on the Omnia and Renko charts….but that issue keeps us up watching charts all the time.
Any solution you can offer for that please?
Thank you.
Hello there,
I would like to use Renko chart with OmniaRemote, I see OmniaRemote is for free so, tell me if I’m wrong, I just need to buy license for Renko (Renko key), right?
Thanks
HI milan, if i purchase rengo bar its comes with omnia remote otherwise do i need to purchase separate the omnia remote?
OmniaRemote is an optional and free indicator. You may deploy it with any of the offline charts.
Hello,
Do you have Renko for MT5?
I am sorry, I don’t.
Why does this happen? Usually when I get a reversal bar or if I change profiles. Please look at the pic below?
https://snag.gy/FGXIVD.jpg
How can I change the renko type? I would like to see how the Renko Hybrid works, for example…
Latest version is 211 but the download bring us the version 210.017. I missing the features presented at the gifs
Emailed last year about the download being 210.017 and not 211 (same as last comment) but got no response from developer.
Having trouble with Adobe recognizing Renko.exe because it either is not a supported file or the file has not been correctly decoded. Any thoughts. I wanted to test drive your platform. Thank you
I would like to help, however I have no experience with recognizing renko.exe in Adobe.
Hi Milan,
I have Renko with wicks and Renko w/o Wicks installed on MT4 I can open both windows individually.
1. Problem – When I use the OmniaRemote, i open the menu, I click on a different renko chart between between the two types of renko (with and w/o wicks), it does not switch.
2. Problem – when I click a different chart in the menu the menu does not click off unless I click the name of my original chart name
My mt4 version is Version 4 build 1340.
Please help 🙂
Renko chart is getting very slow when i attached my mt4 custom indicator to it. How to make it fast
Is there an indicator to display “only”, the marks on levels for new candle to open?
Or is there a way to hide the Omnia Remote ( fixed room 20 px on the indicator bottom)? Thanks.
Try this one.
Thanks, works great!